Three-phase power supplies with reduced ripple factor

Three-phase DC supplies with Graetz’s bridge rectifier with connections B6 or B12 are designed for users who need for their receivers an unstabilized DC voltage.
DC-supplies are equipped with a LED indicating the current state of the operation. Standard designs of power supplies are prepared for mounting on mounting brackets.
On request power supplies can be supplied with two types of protection: against fault and overload protection.

Power supplie EZ3W - with smoothing capacitor, used for I_N ≤ 30 A
Power supplie EZ3P - with 12 - pulse circuit, used for I_N> 30 A

Download catalog card in PDF

Product for:

Details:

Design	Power supplies are manufactured according to requirements of EN/IEC 61558
Insulation class	B(130^oC) - standard
Climatic class /environmental class	C1/E0 - land design; C2/E1 - maritime design
Ambient temperature	40^oC
Protection degree	IP 00
Protection class	I
Frequency	50/60 Hz
Primary voltage	up to 3 x (do 500) V
Secondary voltage	24 V DC (standard)
Terminals	screw terminals with the cross section up to 50 mm²
Fastening	by means of angles

Technical sketch


Standard design

Dimension table

Technical data of three-phase power supplies with reduced ripple factor EZ3W i EZ3P**

Type	U_DC [V]	I_DC [A]	L [mm]	B [mm]	H [mm]	d [mm]	e [mm]	f [mm]	Weight [kg]
EZ3W_* - 0,32	24	10	155	155	171	130	132	8 x 12	6,1
EZ3W_* - 0,48	24	15	195	167	185	173	147	8 x 11	7,2
EZ3W_* - 0,63	24	20	195	170	190	173	87	8 x 11	9,5
EZ3W_* - 0,95	24	30	210	225	208	173	85	8 x 11	12,5
EZ3W_* - 1,15	24	40	210	215	208	173	95	8 x 11	16,0
EZ3W_* - 1,45	24	50	240	260	270	198	105	8 x 11	19,5
EZ3W_* - 1,70	24	60	240	272	270	198	120	8 x 11	23,2
EZ3W_* - 2,30	24	80	265	265	293	198	114	8 x 11	28,5
EZ3W_* - 2,90	24	100	300	270	333	240	122	11 x 15	32,5
EZ3W_* - 3,40	24	120	300	282	333	240	135	11 x 15	41,5
EZ3W_* - 4,30	24	150	300	315	365	240	162	11 x 15	56,5

*) - for product design with climatic/environmental class C2/E1 (maritime design W/3 or tropical design T/3) the letter "M" or "G" ought to be added depending on final application
**) - this table was prepared based on the technical specification for power supplies with voltage ratio 400//24V DC operating under normal conditions. For other conditions and data the values may change

Note:

Manufacturer reserves the right to make changes resulting from the continuous development of products offered.

If requested in advance, it is possible to manufacture a power supply in other version.