Single-phase shunt reactors ED1K

Single-phase shunt reactors type ED1K can be applied in compensation systems for capacity reactive power. This reactive power occurs in systems with synchronous machines and in vast, low and medium voltage cable networks.
The choke ratings are selected for typical used compensation systems.
There is a possibility to produce reactors with other technical data after mutually settlement.
The fixing method of these reactors has to ensure an electrical separation from the base plate (for example by means plastic supports ).

Download catalog card in PDF

Product for:

Details:

Design	Chokes are produced according to :EN/IEC 60076-6
Rated output power	0,25 - 5 kVAr
Rated voltage	230 V
Frequency	50 Hz
Protection degree	IP 00
Insulation class	F(155^oC) - standard
Ambient temperature	40^oC - land design 45^oC - maritime design
Climatic class /environmental class	C1/E0 - land design C2/E1 - maritime design
Terminals	screw terminal blocks or cable lugs
Fastening	by means of angles
Overheat protection	thermal switches

Technical sketch


Design A with screw terminal blocks

Design B

Dimension table

Technical data of single-phase shunt reactors ED1K

Power [kVAr]	Type of the chocke	Inductance [mH]	Current [A]	L [mm]	B [mm]	H [mm]	d [mm]	e [mm]	f [mm]	Weight [kg]	Des.
0,25	ED1K - 0,25/230	678	1,08	85	77	95	65	63	4,8 x 8	2,2	A
0,5	ED1K - 0,5/230	340	2,16	120	106	120	90	84	5,8 x 12	4,9	A
0,75	ED1K - 0,75/230	226,4	3,25	120	106	120	90	84	5,8 x 12	5,2	A
1,0	ED1K - 1,0/230	166,5	4,4	120	130	120	90	104	5,8 x 12	6,8	A
1,5	ED1K - 1,5/230	112,3	6,52	150	108	145	122	88	7 x 13	7,8	A
2,0	ED1K - 2,0/230	84,9	8,67	175	138	160	135	111	7 x 13	13,8	A
2,5	ED1K - 2,5/230	67,2	10,9	175	148	160	135	121	7 x 13	16,2	A
3,0	ED1K - 3,0/230	55,9	13,1	175	148	160	135	121	7 x 13	16,2	A
4,0	ED1K - 4,0/230	42,1	17,4	175	152	245	116	126	11 x 15	17	B
5,0	ED1K - 5,0/230	33,7	21,7	200	165	280	140	133	11 x 15	19,7	B
If requested in advance, it is possible to manufacture chokes in other version.