Transformers with “V” - connection
Transformers with the "V" connection are used wherever there is a need for single-phase power supply with high power output. Standard supply procedure of such receivers from the three-phase network causes a strong asymmetry and loads only two phases. Using transformers with the V connection significantly decreases the asymmetry of network load.
Product for:
Details:
| Design | Transformers with V-connetion (changing number of phases 3 to 1) typu ET3V1 are produced in accordance with requirement of standards : EN/IEC 61558 or EN/IEC 60726 |
|---|---|
| Insulation class |
B(130oC) - standard up to 5 kVA; F(155oC) - standard above 5 kVA |
| Climatic class/Environmental class |
C1/E0 - land design; C2/E1 - maritime design |
| Ambient temperature | 40oC |
| Protection degree | IP 00 |
| Protection class | I |
| Frequency | 50/60 Hz |
| Primary voltage | up to 1000 V |
| Secondary voltage | up to 1000 V |
| Fastening | by means of angles |
Technical sketch
 |
 |
| Standard design | |
Dimension table
Technical data of examples of transformers changing number of phases 3 to 1 type ET3V1
| Type of transformer | Power [kVA] |
Design | L [mm] |
B [mm] |
H [mm] |
d [mm] |
e [mm] |
f [mm] |
Weight [kg] |
|---|---|---|---|---|---|---|---|---|---|
| ET3V1 | 2,5 | 3x380V/1x42V/220V Vv0 | 300 | 155 | 337 | 240 | 120 | 11 x 15 | 30 |
| ET3V1 | 15 | 3x440-415-380V/1x15V Vv0 | 510 | 450 | 470 | 430 | 230 | 11 x 15 | 178 |
| ET3V1 | 25 | 3x480V1x120V Vv0 | 525 | 400 | 465 | 430 | 240 | 11 x 15 | 198 |
| ET3V1 | 56 | 3x480V/1x44V Vv0 | 690 | 530 | 555 | 590 | 271 | 11 x 15 | 451 |
Note:
Producent zastrzega sobie prawo wprowadzania zmian wynikających z ciągłego rozwoju oferowanych wyrobów.
Możliwe jest wykonanie transformatora w innej wersji i o innej mocy niż podano w tabeli po wcześniejszym uzgodnieniu.
Configuration of the housing determined according to individual customer needs. Please contact our sales department or fill out our inquiry form.
